ldm-valves.ru | RV/UV 3×0

RV/UV 3×0

RV3x0 Control and shut-off valves
DN 15 to 400, PN 40 to 63, Kvs 0,01 to 1600 m³/h

Description
Control valves RV/UV 3×0 (Ex) and RV/UV 3×0 are single-seated valves designed for regulation and shut-off of process medium flow. In regard of a great variety of used actuators, the valves are suitable for regulation at low as well as high differential pressures in a diversity of operating conditions. Flow characteristics, Kvs values and leakage rates correspond to international standards.
Valves RV/UV 3×0 (Ex) are equipped with hand wheel or are especially designed for electromechanic actuators of the following producers: ZPA Nová Paka, Regada, ZPA Pečky, Schiebel, Auma or for pneumatic actuators LDM, SPA Praha and Flowserve.

Application
The valves series RV/UV 3×0 are designed for applications in heating, ventilation, power generation and chemical processing industries.
The valves RV/UV 3×0 Ex meet the requirements II 1/2G IIB TX acc.to ČSN-EN 13463-1 (6/2009) and ČSN EN 1127-1 (5/2008), and in connection with suitable actuators, they are also designed for applications in gas and chemical industries.
Valve body can be optionally made of cast steel or stainless steel.

Process media
Valves series RV/UV 3×0 are designed for regulation (RV 3×0) and shut-off (UV 3×0) of flow and pressure of liquids, gases and vapours without abrasive particles e.g. water, steam, air and other media compatible with material of the valve body and inner parts. The valves series RV /UV 3×0 Ex are also designed for control and shut-off of the flow and pressure of technical and fuel gases and inflammable liquids. To ensure a reliable regulation, the producer recomends to pipe a strainer in front of the valve into pipeline or ensure in any other way that process medium does not contain abrasive particles or impurities.

Catalogue sheets

02-09.1

Control and shut-off valves RV 300

GB, RUS

RV/UV 3×0

Download

Feedback